The calibration gas curvette is a sealed cell with quartz windows on each end filled with a specific concentration of the gas that the analyzer module will measure. The gas concentration in the cell is selected to give a response equal to a span gas at approximately 80 to 90% of full-scale response on the primary analyzer range. When automatic calibration is initiated, the sample cell is filled with zero gas. This cell is then moved into the optical path of the infrared source and detector. This simulates flowing a span calibration gas into the sample cell and eliminates the need to calibrate the analyzer module with an external cylinder gas. This option is applicable only to NDIR analyzer modules measuring CO, CO₂, SO₂, NO, and N₂O and must be installed when the analyzer is first purchased and the primary range established.

Stainless steel Tubing and Swaglok Fittings can be provided as an option when the instrument is intially delivered. This option cannot be easily added at a later date. This option is not available for the CLD or O₂ analyzer modules at this time.

HORIBA offers systems to meet Class I, Div II area classifications:
Heated Lines
Sample Probes
Shelters

At the center of thousands of Allen-Bradley control solutions around the globe, you'll find a PLC-5 controller. The chassis-based, modular family of PLC-5 programmable controllers offers you flexibility in programming, networking, I/O and choice of controllers to match your exact requirements. Well-suited for many diverse applications, the PLC-5 controller brings together existing and future systems by means of networks such as EtherNetp/IP, ControlNet and DeviceNet, and offers connectivity amoung MicroLogix, SLC 500, and ControlLogix controllers. With the flexibility to grow with your needs without your having to sacrifice capital on training investments, the PLC-5 controllers will continue to maintain their value in the years ahead.

The DX200 is a DAQSTATION that displays real-time measured data on a color LCD and saves data on a 3.5-inch disk. Network connection via Ethernet enables notification by e-mail and the ability to monitor the system from a web site, as well as transfering files through FTP. Communication with FOUNDATION through Fieldbus and Modbus is also possible.

The DX200 comes in 4, 8, 10, 20, or 30 -channel models and the input signal, DC voltage, thermocouple, resistance temperature detector, or contact signal can be set to each channel. Data saved to a 3.5 disk can be converted to Lotus 1-2-3, Excel, or ASCII file formats. The included viewer software allows display and printout of waveforms.

HORIBA provides high temperature and specialty wire and cable products for our analyzers. These products are designed to withstand harsh industrial environments and exceed specialized industry standards in the broad applications of appliance, industrial power and instrumentation, military, transit, and specialty markets.

HORIBA also offers an extensive line of thermally insulated tubing, temperature controlled tubing and flexible heated hose products, and self-regulating heating cables used in industrial and commerical applications where precise control of fluid properties is required.